Esterra Park 

Fabrication and installation of three, illuminated art panels. Each sculpture is 10 feet wide by 4.5 feet tall and 10 inches deep, and fabricated from 3/8″ thick, hot rolled steel. The front and back panels are water jet cut with a cattail pattern. The front panel is 10 feet wide while the back is 6 feet wide; the panels slope from the top and are jointed at the bottom. One foot wide translucent panels were placed on the ends of the taller sides and an LED light box was fabricated and adhered to the bottom of the back panel. The steel was left raw to rust naturally.